Engine Oil Sumps (Oil Pan)

Introduction

The oil sump is also referred to as the oil pan, oil tray, or oil reservoir. Oil sumps are used for both four stroke and two stroke internal combustion (IC) engines.

Location of Engine Oil Sump

Location of Engine Oil Sump

 

Lubrication Oil System

With the exception of small two stroke engines, all engines require a lubrication oil system (also known as a lube oil system). Typical systems include an oil sump/reservoir, oil pump, oil filter and all associated piping.

Oil Sump

Oil Sump

 

What is the Purpose of Lubrication Oil?

Their are two purposes of lubrication oil within an engine:

  1. Lubricate engine parts - reduce friction between engine parts and thus reduce the heat generated.
  2. Cool engine parts - remove some of the heat created due to friction and due to engine combustion.

Click here to learn more about bearing lubrication.

 

Enjoying this article? Then be sure to check out our Internal Combustion Engines Video Course! The course has a quizhandbook, and you will receive a certificate when you finish the course. Enjoy!

 

How An Engine Lubrication Oil System Works

A negative pressure is created on the suction side of the oil pump and this draws lubrication oil to the oil pump. The pump raises the pressure of the oil to approximately 3 bar(g) (approx. 44 psi). The oil is discharged from the pump to an oil filter.

Engine Oil Filter

Engine Oil Filter

An oil filter (or oil filters) remove foreign bodies from the oil. Foreign bodies are typically items such as metal shavings, dirt and dust. Clean oil is discharged from the filter and enters the engine. The oil lubricates all of the engine's reciprocating and rotating parts and then drains back to the oil sump.

Lubrication oil loses its lubricating properties over time, so it must be replaced. An oil drain at the base of the oil sump is provided for this purpose.

Oil Sump Drain

Oil Sump Drain

Note: Engine oil pumps are usually positive displacement pumps, not centrifugal.

 

Oil Sump Design

The purpose of an oil sump is not simply to store oil, an oil sump has two other main functions:

  1. An oil sump allows oil to settle and this reduces the likelihood of the oil foaming.
  2. The oil sump is designed in such a way as to allow the oil to be cooled efficiently when the engine is in operation. Cooling fins give the oil sump a large contact surface area with the surrounding air, this is makes heat transfer much more efficient compared to when no cooling fins are installed. As the vehicle accelerates, more air passes over the oil sump, which means that more cooling is supplied as the engine oil temperature increases (proportional response).

Oil Sump Cooling Fins

Oil Sump Cooling Fins

Note: Medium and large kW (or hp) engines will usually have a totally separate system for cooling lubrication oil, this is because cooling by air is no longer possible due to the volume of oil.

 

Oil Sump Types

There are two main engine sump designs currently employed, these are the dry and wet type sumps.

Dry sump designs have more than one sump per engine; the secondary sump is separate to the main engine sump. Oil drains from the engine into a main sump where it is then removed to an additional external sump. The design ensures only a relatively small amount of oil can accumulate within the main oil sump. Dry sumps are more complicated than their wet sump counterparts as they utilize more piping and pumps.

Wet sump designs form part of the main engine crankcase, there is no additional sump. The wet sump design is simpler than its dry sump counterpart although more space is required under the engine for oil storage. Wet sumps usually employ a series of baffles to prevent oil splashing/sloshing when the automobile is moving (accelerating, travelling up an incline etc.). The baffles help reduce the free surface effect and reduce the likelihood of the lubrication oil pump losing suction.

Wet Oil Sump Design

Wet Oil Sump Design

Motorbikes utilize wet or dry sumps, but a dry sump motorbike has the benefit that the engine can be mounted closer to the ground and this makes the bike more stable (lower centre of gravity).

 

Why Are Oil Sumps Divided Into Sections

Oil sumps are divided into sections to reduce 'sloshing' of the oil within the oil sump; this effect is also known as the 'free surface effect' and is a notable concern on ships.

Example

A car turns a corner at high speed so the oil flows to one side of the engine sump. In extreme cases, this could mean that the oil pump loses suction from the oil sump, which would starve the engine of oil and cause damage to the engine.

 

Additional Resources

https://www.my-cardictionary.com/cardictionary/products/produkt/Produkt/show/oil-sump.html

https://www.britannica.com/technology/oil-sump

https://www.howacarworks.com/oil-pan